A179 L Type Fin Tube Application
- Heat Exchangers: A179 fin tubes are often used in heat exchangers to improve efficiency by increasing the surface area for heat transfer.
- Cooling Systems: They are utilized in cooling systems, such as air conditioning units and refrigeration systems, to efficiently dissipate heat.
- Boilers: In boiler systems, fin tubes help maximize heat absorption from the combustion gases.
- Power Plants: They are employed in power generation plants for heat recovery and efficiency improvement.
- Condensers: Fin tubes are also found in condensers to enhance the condensation process by providing more surface area.
A179 L Type Fin Tube Fin Tube FAQ
1. What is the advantage of using fin tubes?
- Increased surface area for improved heat transfer
- Reduced size and weight of heat exchangers
- Enhanced thermal performance, leading to energy savings
2. What are the mechanical properties of A179 L Type fin tubes?
- Minimum yield strength: 30,000 psi (207 MPa)
- Minimum tensile strength: 50,000 psi (345 MPa)
3. Can A179 L Type fin tubes handle high pressures?
- Yes, they are designed to operate under high-pressure conditions, making them suitable for demanding industrial applications.
4. Are A179 L Type fin tubes resistant to corrosion?
- While they have some corrosion resistance, additional coatings or treatments may be necessary for environments with high corrosion potential.
5. What is the manufacturing process for A179 L Type fin tubes?
- They are manufactured by forming the tube, attaching the fins, and conducting quality control tests to ensure they meet the required specifications.
6. What maintenance do A179 L Type fin tubes require?
- Regular inspections and cleaning are recommended to prevent fouling and maintain heat transfer efficiency. The frequency of maintenance depends on the operating conditions.
ASTM A179 Wound L Type Fin Tube For Boiler And Heat Exchanger
Our factory has twelve L-fin production lines. The outer diameter of the base tube of the L-fin tube can not be too small, the minimum is generally 16mm, and the general height is 15.88, the heat transfer efficiency is the best. The price of the A179L fin tube is relatively low, and the conventional material of the fin is aluminum or copper. The general working environment needs to be less than 200 degrees Celsius.
Product Tags:
|
|
ASTM A179 Wound L Type Fin Tube For Boiler and Heat Exchanger Images
|
